Inmarsat BRM Скачать руководство пользователя страница 46

Страница: 46 / 90

Note:

If for any reason the upgrade is not successful and the connection to the BRM is lost then

reboot the BRM three (3) times using the Reset button on the HDK, and the BRM will boot up using

the previous working image.

10.1.2: Remote Firmware Upgrade

You may want to test an upgrade of BRM firmware against a remote firmware server, in which case

the new firmware will be downloaded over the relevant network from the relevant file path (one per

image) on a remote server, via an active Admin PDP Context on the BRM.

Note:

It is possible to use a BGAN Application Tester (BAT) or BGAN-on-a-Bench (BoB) to

simulate a Firmware Upgrade with upgraded firmware on it.

To perform a remote firmware upgrade, take the following steps:

1. Set the following values in the

Configuration

page and then

reboot

the BRM, to ensure that the

Admin PDP Context

active

and

correctly configured

, to allow you to remotely upgrade the

firmware:

admin_apn

admin_configured

true

admin_user

admin_password

disable_remote_fw

false

2. In the

Firmware Upgrade

page, enter the Hostname of the server from which the new

firmware will be downloaded into the

Remote Upgrade Server Hostname

field.

3. Enter the file path on the server from which the new firmware will be downloaded into the

Path

field.

Note:

If no hostname or path is specified, the default values, which correspond to the Inmarsat

server, will be used to perform the remote firmware upgrade. This default values are:

Hostname

fup.bgan.inmarsat.com

Path

brm/current/remoteupdateimageset.bin

4. Select the

Start Remote Upgrade

icon. This will only download the core images that are

different to the current ones on the BRM.

5. Once the new firmware has been downloaded, select the

Apply Remote Upgrade

icon.

You can use

Reset Upgrade

Reboot Other Image

, or

Reboot Now

as described in

Local

Firmware Upgrade

For more information about the remote firmware upgrade, please refer to

Firmware Upgrading a

BRM based Terminal Application Note

10.1.3: WebUI Upload

To upload an alternative WebUI, select

WebUI Upload

, choose the relevant file, and select

Upload WebUI

46:

BGAN Radio Module Terminal Development Kit User Guide

Confidential and Proprietary – Inmarsat Global Limited

inmarsat.com

Содержание BRM



























































































Результаты поиска

Содержание BRM

Отзывы:

Бренды по названию

Популярные бренды

Inmarsat BRM, Руководство пользователя

Результаты поиска

Содержание BRM

Отзывы:

Бренды по названию

Популярные бренды