Inmarsat BRM Скачать руководство пользователя страница 45

Страница: 45 / 90

Status

shows the current status of a firmware upgrade:

idle

- status when firmware is not being upgraded

local_upgrade_in_progress

- status when the

Start Upgrade

icon has been

selected and the first core is being flashed

local_upgrade_stage1

- status once the first core firmware upgrade has

completed successfully (cores updated sequentially from left-to right as displayed on
the screen)

local_upgrade_stage2

- status once the second core firmware upgrade has

completed successfully

local_upgrade_stage3

- status once the third core firmware upgrade has

completed successfully

complete_awaiting_reset

- status once all four or all cores selected firmware

upgrades have completed successfully. This is the prompt to select the

Reboot Now

icon

10.1.1: Local Firmware Upgrade

A Local firmware upgrade is done if you are upgrading the stored firmware from a device that is

directly connected to the HDK via ethernet.

To perform a local firmware upgrade, take the following steps:

1. Log in to the

Inmarsat Developer Website

and download to a local drive on your laptop or PC

connected to the TDK the latest BRM firmware from the following navigation:

Developer Resources > Technology Platforms > BGAN > Hardware >
BGAN Radio Module (BRM) > Documentation and Resources > TDK Resources

2. Extract the

[DSP][ARM][1][2]_App.bin

files from the downloaded .zip file.

3. Select the

Browse

button and select/open the corresponding image file for the processor cores

selected to be upgraded or downgraded.

Note:

You need to select the relevant

.bin

file (ARM1_App.bin; ARM2_App.bin; DSP1_App.bin;

DSP2_App.bin) to run an upgrade. Do

not

select the .zip file.

4. Select the

Start Local Upgrade

icon to start the upload and upgrade or downgrade process.

Note:

The first core upgrade or downgrade will take the longest to complete, because part of the

process involves erasing the entire previous flash.

Select

Reset Upgrade

if you wish to abort and reset the upload and upgrade process. Do not select

this option unless you wish to abort the process. This option only becomes available once the

Start

Local Upgrade

icon has been selected.

5. Select

Reboot Now

to restart the BRM and boot from the stored firmware upgrade.

Note:

This option only becomes available once the upgrade of a firmware file is complete.

If the upgrade or downgrade has not succeeded for some reason, you can also return the BRM to its

previous firmware version, by selecting the

Reboot Other Image

button.

45:

BGAN Radio Module Terminal Development Kit User Guide

Confidential and Proprietary – Inmarsat Global Limited

inmarsat.com

Содержание BRM



























































































Результаты поиска

Содержание BRM

Отзывы:

Бренды по названию

Популярные бренды

Inmarsat BRM, Руководство пользователя

Результаты поиска

Содержание BRM

Отзывы:

Бренды по названию

Популярные бренды