3
© 2001 - INLINE, Inc.
IN3216R Operation Manual - V1.1 1/4/01
INTERNAL FUSES
The IN3216R contains two internal fuses. If power is applied to the unit and the front panel LED is not
illuminated, one or both of these fuses may be blown. Open the case as described below and replace any
blown fuses with new 200mA / 250V fuses.
Caution: Changing the internal fuses requires the unit to be opened. In order to avoid possible
electric shock and static discharge to the unit, internal adjustments must only be carried out by
qualified technicians in a static free environment.
Fuse Changing Procedure:
1. Remove power from the unit.
2. Remote the four case screws on the sides of the unit.
3. Gently slide the top cover off.
4. Locate the fuses (F1 & F2) and replace with new 200 mA / 250V fuses as required.
5. Replace the top of the case and tighten the four case screws.
Specifications
IN3216R Video Distribution Amplifier
Input
Input 1
(1) BNC for composite video signals
Termination: 75 ohms or High Z
Signal
Analog Video, 1.5 Vp-p max.
Loop Out / Input 2
(1) BNC
Termination: 75 ohms or High Z
Output
Connectors
(6) BNC female
Impedance
75 ohms
Video Gain
1.0 (Unity Gain)
General
Bandwidth
180 MHz @ -3dB
Internal Jumpers
(1) Input termination
Power Supply
Internal; Factory set for 120 VAC or 230 VAC
Dimensions
1.65” x 6.8” x 4.8” / 4.2cm x 17.3cm x 12.2cm
Weight
Product Weight: 1.5 lbs. / 0.7 kg.
Shipping Weight: 3 lbs. / 1.5 kg.
Regulatory Compliance
Safety
UL 1950, 3
rd
Ed.; CAN/CSA-22.2 No 950, 3
rd
Ed.
EMI
FCC class A; CE: EN55022 (1987), EN50081-1 (1991),
EN50082-1 (1992 & 1994), EN60950-92
