40
© 2002 - INLINE, Inc.
IN1408 Operation Manual - V1.4 3/21/02 12:32 PM
COMMAND
DESCRIPTION
ST?
return scan type (add above
numbers)
SV+
increase vertical size
SV-
decrease vertical size
SV@
set vertical size to
normal**(100)
SVxxx
set vertical position to
absolute value (
♦
-
100)
SV?
Return vertical size
SYNC0
set output sync format to
RGBHV- -**
SYNC1
set output sync format to
RGBHV+ +
SYNC2
set output sync format to
RGBS (no serrations)
SYNC3
set output sync format to
RGBS with serrations
SYNC4
set output sync format to
RGsB
SYNC5
set output sync format to
RGsB w/Serr
SYNC?
Return output sync format
TP+
increase total pixels
TP-
decrease total pixels
TP@
set total pixels to normal**
♦
TPxxx
set total pixels to absolute
value
♦
TP?
return total pixels
TRE+
increase treble
TRE-
decrease treble
TRE@
set treble to normal**(005)
TRExxx
set treble to absolute value
(000-010)
TRE? return
treble
UP
front panel up button
VOL+
increase volume
VOL-
decrease volume
VOL@
set volume to normal**(020)
VOLxxx
set volume to absolute value
(000-030)
VOL? return
volume
*
This Command List is preliminary. All
commands listed in this manual are functional,
however, INLINE reserves the right to modify,
remove and /or add commands on future product
revisions. The commands are not case sensitive.
**
Default values when factory reset is
performed
.
♦
Normal and available values depend on the
current input or output mode
.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
