2
7.
Connect the power cable to the hard disk(s).
8.
Connect the SATA hard disk(s) to the controller card with the SATA cable.
9.
Connect the computer case’s front panel Hard Disk LED cable to pin header
JP9
(See Figure 1)
Figure 1
Connect the one end of the LED cable (included) to pin header
JP10
, and the other end to your motherboard’s
HDD LED connector
Secure the computer case and switch on your computer.
Port Configuration (Optional features)
There are some specific models in which you can change the SATA port on the card freely by changing the
jumper header. Please refer to below table for jumper setting.
Jumper SATA Port
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
CON1
2-3
2-3
2-3
2-3
No Connection
CON2
No Connection
2-3
2-3
2-3
2-3
CON3
1-2
1-2
1-2
1-2
No Connection
CON4
No Connection
1-2
1-2
1-2
1-2
DRIVER INSTALLATION
Installing Driver for supported Windows operating system:
1. Start Windows and insert the driver CD into the CD-ROM drive, assume drive D.
2. Windows will automatically detect the card. Ignore the driver installation wizard.
3. Browse to the following folder on the driver CD:
D:\ASMedia\ASM106x\Windows\
4. Run
Setup.exe
to start driver installation.
5. Follow the on-screen instructions to install the driver.
Updating Drivers and Manual
The latest drivers, full version manual and last-minute changes document are available on the website below:
http://www.drivers-download.com
Search for the following Download Code from “Drivers Search”:
Chipset.
Description
Download Code
ASMedia ASM106x
PCI-Express to SATA 6Gbps controller card
DL-0420001
All specifications and information are subjected to change without prior notice
All brand /company names, logos and trademarks referenced in this manual are the property of their respective owners
Our products including the packaging are not toys and they might contain small parts and sharp objects. Please keep away from children
JP9
