19
5. Adjust the DIP switch to match the setting on the OSD menu. You may refer to the illustration below for the reference of
jumper position. Open the battery cover and remove the batteries on the rear panel of remote control, and then adjust
the jumper blocks using a gadget according to your requirement.
ID1
ID2
ID3 ID4
13. RESTORE THE FACTORY DEFAULT
By default, the DIP switch is set to ID 1. If you have lost the connection and forgotten the configuration between the ID
setting in the OSD menu and the DIP switch on the remote control, restore the factory setting. To do this, press and hold
the reset button for 5 seconds during power-up the device and set the remote control to ID 1.
14. TECHNICAL SUPPORT
Please contact your local distributor or the manufacturer‘s website (www.inline-info.com) for further information or techni-
cal support.
15. DISCLAIMER
1st edition English 40/2018
Documentation © 2018 INTOS ELECTRONIC AG
All rights reserved. No part of this manual may be reproduced in any form or reproduced or processed using electronic,
mechanical or chemical processes without the written consent of the publisher. It is possible that this manual still has
printing defects or printing errors. However, the information in this manual will be reviewed regularly and corrections will be
made in the next edition. We accept no liability for technical or printing errors and their consequences. All trademarks and
industrial property rights are acknowledged. Changes in line with technical progress may be made without prior notice.
Our products, including the packaging, are not toys, they may contain small parts and sharp objects. Please keep away
from children.
InLine is a brand of:
INTOS ELECTRONIC AG
Siemensstrasse 11, D-35394 Giessen
www.intos.de
