Inline 55-1408, Руководство пользователя

Страница: 10 / 18

1. To store the inLINE® Back Stretch Bench, simply keep it in a clean dry place.
2. Adjust the CERVICAL TRACTION EXTENDING TUBE(39), HEIGHT ADJUSTMENT BEAM(10), and
MAIN FRAME(22) to the shortest position. The inLINE® Back Stretch Bench is approximately 63.9
inches long x 18.7 inches wide x 11.1 inches tall. These dimensions will vary. Please measure your
inLINE® Back Stretch Bench if exact dimensions are needed.
3. To move the inLINE® Back Stretch Bench, lift by the CERVICAL TRACTION EXTENDING
TUBE(39) on one end and the HEIGHT ADJUSTMENT BEAM(10) at the other end. Use caution as
the
SWING ARMS(41)
may move and cause a pinching hazard.
The safety and integrity designed into the inLINE® Back Stretch Bench can only be maintained when
the inLINE® Back Stretch Bench is regularly examined for damage and wear. Special attention should
be given to the following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the CAUTION LABEL(60) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(60) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components must be replaced immediately or the inLINE® Back Stretch Bench
removed from service until repair is made.
5. Only Stamina Products supplied components should be used to maintain/repair the inLINE® Back
Stretch Bench.
6. Keep your inLINE® Back Stretch Bench clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
10
STRETCH SYSTEM
The inLINE® Back Stretch Bench stretches the back with
its one way rack and pinion engineering. Lie on the inLINE®
Back Stretch Bench with the ARMPIT PADS(46) under your
armpits, and the
FOAM PADS(2)
holding your ankles. Pull the
LEVER(38) back and forth as many times as needed until you
feel a gentle stretch. Stop pulling at the desired position and stay
at the stretched position for a few minutes. Push the
LEVER(38)
firmly toward your feet to release the stretch.
Push the Lever toward
your feet to release.
Pull the Lever back and forth
as many times as needed to
reach the proper stretch.
OPERATIONAL INSTRUCTIONS