18
www.inline-info.com
Operation via USB Audio:
The InLine® Bluetooth Flight Adapter
enables not only operation in the air-
craft but also playback via USB audio,
i.e. you can also use the Bluetooth
Flight Adapter as an audio transmit-
ter for your computer at home, e.g. to
distribute your favourite music in the
house. Connect the Bluetooth Flight
Adapter with the USB cable to a free
USB Type A socket of your computer,
it will be automatically recognized as a
USB audio device. A driver installation
is not necessary. The connection to the
headphones is made as described in
the steps above.
Disconnect the active connection:
By pressing and holding the multifunc-
tional button for 2 seconds, the Adapter
will be disconnected and switch back to
pairing mode.
Changing the codec mode:
After connected to the In-Flight Enter-
tainment System, press the multifunc-
tional button for a short moment. When
the AptX-HD-Codec-Mode is activated,
the Status-LED lights solid green for 2
seconds, then it indicates the activity
by flashing green at a frequency of 5
seconds. Pressing the multifunctional
button again will change the mode to
the AptX-LL-codec mode, the Status-
LED flashes blue at a frequency of 5
seconds.
Standby and switching on the transmitter:
For switching off the adapter, press
and hold the multifunctional button for
5 seconds. The Status-LED lights solid
red for 2 seconds before the adapter
is switched off. Pressing it again turns
the adapter back on and it is ready for a
new connection. If a connection to the
last connected device is possible, this
is established automatically.
Reset:
To reset the InLine® Bluetooth Flight
Audio Adapter to factory setting, hold
the multifunctional button for 10 se-
conds until the Status-LED lights up
solid purple for 1 second. After that