5
Installing the junction box (sold separately)
Connecting the wires
- Discard power cord if Hardwire Installation is used.
- Follow the directions for connecting the wires (BLACK to BLACK,
WHITE to WHITE), installation instruction is included in the
package of junction box.
- Turn power OFF from the electrical panel before starting
the installation.
- Ensure the wire nuts are tight and carefully place the spliced
wires back into the junction box.
- Mount the junction box following directions given in the junction
box package.
-
-
-
-
-
-
Hardwire Installation (Skip this step if using Plug-in Installation to power unit)
1
2
3
Junction box (sold separately)
Black Wire
White Wire
Power Rocker Switch
CCT Rocker Switch
OFF
ON
Warm White
2700K
Bright White
4000K
Junction box (sold separately)
Installing the under cabinet fixture
Follow the directions above to mount the under cabinet fixture.
Use a flathead screwdriver to carefully pry off the plastic INPUT receptacle that covers the power port on the fixture. Attach the linking cord
to the "INPUT" receptacle on the side of the fixture.
Connect linking cord to the junction box.
Check installation, then restore power to the electrical circuit at the service panel.
Turn on the switch to light the fixture.
The unit can now be turned on with the power switch.