INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C110/C120/D120/D130/T30/T33
7
Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the
rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the
ink flow nozzle downwards, and let the tissue at the same level with the system ink
tank (5-1-3).
Pic. 5-1-1 Pic. 5-1-2 Pic. 5-1-3
VI. Refill ink
During printing, if you found out that the ink level in the tank is below the red
line, please add ink according to the methods.
VII. Check air balance tube
During printing, if you find some abnormal cases, such as bad output, ink drip
out on paper, then you need to check the air balance tube to see if the ink exist. If yes,
please do according to the manual of "ink pump out from balance tube”.
VIII. Warnings
1. During printing, please do not take cartridges over than the printer. Please
keep ink tank and printer on the same level.
2
.
During printing, do not inverse, lift up or lower ink tanks.
3
.
Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35
degrees.
5. Please do not shake cartridges to avoid leaking.
IX. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or
workmanship. Rarely the equipment partly or completely fails within the warranty
period. In these cases we do everything possible to ensure that our customers are
satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
Please adhere to the following points to receive a warranty service as soon
as possible:
When accepting the product check if the warranty certificate is filled in
correctly.
