background image

PRE AMPLIFIER

IPP-8213   

3

Welcome you from management and staffs of INKEL PA.
All of the staffs here at INKEL PA have dedicated to provide excellent products of value, and we are glad
that you have purchased one of our products.
We sincerely trust that this product will provide satisfactory service, but if anything goes up you do not 
satisfy completely, we will endeavor to make things right.
Welcome to INKEL PA and thank you for joining our worldwide family.

Please inspect all equipment carefully right after unpacking. If you find any damages, contact your supplier
or dealer immediately. Only a shipper may file a damage claim as a carrier for damages which have been 
incurred during shipping. Be sure to keep carton boxes and other all packing materials for the carrier’s
inspection. If your packing materials are in good condition, please keep them. If you ever need to return
the unit to INKEL PA or an authorized service center, you should use only the original factory packing.

Welcome

WARNING : TO PREVENT FIRE OF ELECTRIC SHOCK HAZARD,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

Unpacking

To insure proper use of this product, please read owner’s manual carefully and keep this manual in an 
easily accessible place for future reference.

Before Use

CAUTION : TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE THE COVER (OR BACK)

NO USER SERVICABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of non insulated “dangerous” voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instruction in the literature accompanying the
products. 

Содержание IPP-8213













Отзывы: