GRAPHIC EQUALIZER
IEQ-8231
7
1. XLR INPUT JACK
Balanced 3-pin female XLR input connector is provided for each channel.
2. 1/4
"
TRS INPUT JACK
Balanced 1/4
"
TRS input connector is provided for each channel.
3. XLR OUTPUT JACK
Balanced 3-pin male XLR output connector is provided for each channel.
4. 1/4
″
TRS OUTPUT JACK
Balanced 1/4
"
TRS output connector is provided for each channel.
5. AC POWER INPUT & FUSE HOLDER
Connect this unit product to an appropriate AC power source using the supplied universal AC power cord.
7. BYPASS SWITCH
The position of this switch determines whether the unit operates normally or allows the signal to bypass all
equalization setting and pass through unaffected. The switch will illuminate when it is in the bypass mode.
8. POWER SWITCH
If this switch is pressed, the power is supplied and the unit starts operating while inner LED is illuminated.
When the power is off, incoming signal is hard-bypassed to output signal.
Rear Panel
Содержание IEQ-8231
