Inkbird IHT-1S, Быстрый старт

Страница: 3 / 5

Instruction
●
Button Instruction
Short press and release HOLD/℉/℃ button
can hold the measured temperature or
cancel the hold temperature when unit
runs.
●
How to Enter the Setting Mode
Press and hold the button for 8
seconds to enter setting mode, will appear
"CF" on the screen. Short press one time to
choose "C" or "F" .Press and hold for about
2 seconds to enter into the calibration
mode. LCD screen shows CA letter. Short
press once, it will show the calibration
value and blink, then you can short press
the button to adjust the desired calibration
temperature or hold the button to set fast.
The calibration temperature will be
automatically saved after 10 second if
there is no operation.
Notes: The calibration will be reset to 0.0
℉/℃ if you change the temperature unit
between ℉ and ℃, the calibration need to
be reset.
●
LCD Screen (Liquid Crystal Display)
Display the measured temperature, HOLD
letter, charging mark and battery capacity