Ink Machines WFS X2, Руководство пользователя, Страница: 7 / 10

InkMachines Rev 1.0 / 2021-08-25
Trouble shooting
Foot switch
Instruction If the Footswitch still not
functioning
1. Make sure that the footswitch is
charged and the light is active.
Charge with USB-C. The light on
the back should indicate that the
footswitch is charging with
steady red or blue light.
2.
Make sure that the footswitch is paired to at least one
device.
Go to 3.
3. Pair the footswitch to the app and go to the footswitch
device settings. The green light in the app should indicate when
the footswitch is pressed.
Go to 4.
4. Check that the Foot switch foot button is moving freely so
the switch can be triggered.
Go to 5.
5. Remove the two screws on the back and clean the inside
from any dirt and check that the magnet is present in the top
of the inside the footswitch button.
Contact InkMachines for further
instructions, see
www.inkmachines.com
Technical specification
Foot switch WFS ©
Battery LiPo 550mAh
Radio 2.4 GHz BLE
HMI Status led, Sound, Button
Charging USB-C
Modes Hold or Toggle
Switch type Magnetic
Operating temperature 10 – 35 ̊ C Indoor use only.
Weight 160 grams
Dimensions L x W x H Ø98x25mm