Ink Bird IVC-001W, Руководство пользователя

Страница: 10 / 30

Step5: Press the button to select the
high-humidity trigger value. “HIGH
HUMD.” is displayed and the
corresponding parameter flashes. Press
the or button to adjust the
high-humidity trigger value to 80.0%RH.
Step6: Press the button to select the
low-humidity trigger value. “LOW HUMD.”
is displayed and the corresponding
parameter flashes. Press the or
button to adjust the low-humidity trigger
value to 70.0%RH.
ON
OFF
SETTING
HIGH TEMP.ALARM DIFF.TEMP.VALUE
LOW TEMP.ALARM TEMP.CALIBRATION
HIGH HUMID.ALARMDIFF.HUMID.VALUE
LOW HUMID.ALARM HUMID.CALIBRATION
SETTING
HIGH TEMP.ALARM DIFF.TEMP.VALUE
LOW TEMP.ALARM TEMP.CALIBRATION
HIGH HUMID.ALARMDIFF.HUMID.VALUE
LOW HUMID.ALARM HUMID.CALIBRATION
Step7: Step7: Press and hold button for 2 seconds or no operation for 60 seconds
(or 10 seconds in the quick setting mode) to quit the setting state and save the set
parameters.
Following the above steps, the fan will run at the fan speed of 10, the temperature will
be controlled at 81.0℉~82.0℉, and the humidity will be controlled at
70.0%RH~80.0%RH, as shown below:
81.0℉ 82.0℉
Temperature trigger value
Fan status
6