Injoy Motion ALLIED TANK ATTACK, Руководство по установке и обслуживанию

Страница: 28 / 53

©2013 Injoy Motion Corp.
26
4. Trouble shooting
4.1 Error code
EC001
Description The steering wheel (Yoke Controller) fails in automatic
calibration.
(The steering wheel (Yoke Controller) does not rotate.)
Troubleshooting
1. Check out if the belt is
broken or come off.
1. If the belt is come off, please check out the
reason.
2. If the belt is broken or wear out, please
replace it with the new one with the same
specifications.
2. Check out if the 24V
power supplier is out of
work.
1. Check out if the cockpit card connector is off.
2. Replace the 24V power supplier.
3. Check out if the 24V
power is connected to
the cockpit card.
4. Check out if the cockpit
card has output when
the machine is booting
up.
1. If there is a 24VDC power connected to the
cockpit card but there is no output to the
motor, please replace the cockpit card.
2. If a voltage is transmitted to the motor and the
motor does not rotate, please change the
motor.
5. The cockpit card is out of
order.
Replace the cockpit card
EC002
Description The automatic calibration of the steering wheel (Yoke Controller)
is done, but the value is wrong.
Check steps Troubleshooting
1. Check out if the potentiometer pins of the
steering wheel (Yoke Controller) are
connected inversely.
(Measure the potentiometer resistance
values on feet 2 and 3 with an electric
meter. The potentiometer resistance
increases as the steering wheel moves
clockwise, and decreases as the steering
wheel moves counterclockwise. )
If the changes in the
potentiometer resistance are
reversed, please swap foot 1
and foot 3.
If there is no change in the
potentiometer resistance,
please replace the
potentiometer.
2. The cockpit card breaks down. Replace the cockpit card .