Figure 11
Figure 11
Figure 12
Figure 12
Figure 13
Figure 13
Figure 14
Figure 14
Figure 15
Figure 15
Figure 16
Figure 16
Screw the secondary
Screw the secondary
vibra-mount into the
vibra-mount into the
pre-tapped hole in
pre-tapped hole in
the top frame.
the top frame.
Press the filter over
Press the filter over
the end of the
the end of the
secondary intake
secondary intake
and tighten the clamp.
and tighten the clamp.
The assembled intake
The assembled intake
is inserted into the
is inserted into the
open cavity in the
open cavity in the
bumper section.
bumper section.
The top end of the
The top end of the
secondary intake is
secondary intake is
pressed into the hose
pressed into the hose
on the mass air sensor.
on the mass air sensor.
The bracket on the
The bracket on the
secondary intake is
secondary intake is
lined up to the vibra-
lined up to the vibra-
mount stud.
mount stud.
The intake is shown
The intake is shown
here used as a short
here used as a short
ram.
ram.
This silicone elbow is
This silicone elbow is
designed with a velocity
designed with a velocity
stack on both ends to
stack on both ends to
create a smooth transition
create a smooth transition
from the intake tract and
from the intake tract and
into the throttle body.
into the throttle body.
This adapter is designed
This adapter is designed
out of special composites
out of special composites
that repeal heat while cre
that repeal heat while cre
-
-
ating a vortex affect with
ating a vortex affect with
the patented fins scaling
the patented fins scaling
along the inside walls.
along the inside walls.
<<<<<
<<<<<
<<<<<
<<<<<
The harness is being
The harness is being
connected to the
connected to the
mass air sensor.
mass air sensor.
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<
<<<<<