injen SP1869 Скачать руководство пользователя страница 1

Страница: 1 / 4

Part number SP1869

00-05 Mitsubishi Eclipse

00-03 Mitsubishi Galant

00-04 Dodge Stratus R/T

00-03 Chrysler Sebring Coupe LXI

3.0 V6 only

1- Two piece cold air intake (CA)
1-

3 1/2” Injen filter (#1015)

3 1/2” composite adapter (#14029)

1- 2 3/4” 90 deg elbow (#3095)
1- 3 1/4” straight hose (#3045)
1- 3 1/2” straight hose (#3037)
2- Power-Bands

(.312)

.040 (#4003)

4- Power-Bands

(.412)

.056 (#4005)

1- 8” 8mm vacuum hose (#3091)
1- m6 vibra-mount (#6020)
1- gray m6 vibra-mount (#6030)
3- m6 flange nuts (#6002)
4- m6 x m25 bolts (#6006)
2- fender washers (#6010)
1- instruction

Figure 1

Now available, Hydro Shield by Injen

Part Number X-1034

Hydro Shield Sold Separately

Содержание SP1869

Страница 1: ...site adapter 14029 1 2 3 4 90 deg elbow 3095 1 3 1 4 straight hose 3045 1 3 1 2 straight hose 3037 2 Power Bands 312 040 4003 4 Power Bands 412 056 4005 1 8 8mm vacuum hose 3091 1 m6 vibra mount 6020 1 gray m6 vibra mount 6030 3 m6 flange nuts 6002 4 m6 x m25 bolts 6006 2 fender washers 6010 1 instruction Figure 1 Figure 1 Now available Hydro Shield by Injen Part Number X 1034 Hydro Shield Sold Se...

Страница 2: ...ther end Press the other end of the 8mm hose over of the 8mm hose over the 3 8 nipple on the the 3 8 nipple on the intake intake Set the bracket on the Set the bracket on the intake over the grey intake over the grey vibra mount stud Use vibra mount stud Use the m6 nut and fender the m6 nut and fender washer washer Press the 3 1 4 hose Press the 3 1 4 hose over the mass air over the mass air flow ...

Страница 3: ...The bracket on the The bracket on the secondary intake is secondary intake is lined up to the vibra lined up to the vibra mount stud mount stud The intake is shown The intake is shown here used as a short here used as a short ram ram This silicone elbow is This silicone elbow is designed with a velocity designed with a velocity stack on both ends to stack on both ends to create a smooth transition...

Страница 4: ...sor Use the four m6 x m25 bolts in this kit to attach the adapter to the mass air flow sensor See fig 8 7 Press the hose end on the assembled mass air flow sensor over the end of the primary intake Position the mass air sensor in place then semi tighten the clamp See fig 9 8 Take the 3 1 2 straight hose and press it over the end of the adapter inlet use two clamps and only tighten the clamp on the...

Результаты поиска

Содержание SP1869

Отзывы:

Похожие инструкции для SP1869

Бренды по названию

Популярные бренды

injen SP1869, Руководство по установке

Результаты поиска

Содержание SP1869

Отзывы:

Похожие инструкции для SP1869

Бренды по названию

Популярные бренды