Page 3 of Part# SP3028
Install the intake assembly into the vehicle and position
the intake tube to the throttle body. Position the heat
shied to the the tabs from step 10.
Connect the 2 pump lines to the intake tube fittings. Light
lubrication can be put to the inside of the fittings for easier
installation.
With the factory screws from step 10, secure and
tighten the heat shield.
A)Using provided M6 allen and fender washer, secure
and tighten the tab on heat shield. B)Position the best
fit and tighten the tab on intake tube using 10mm sock-
et or wrench.
Figure 17
Figure 18
Figure 19
Figure 20
Using 8mm nut driver, tighten the clamp on the intake
tube.
Figure 21
Attach the rubber trim to the top of the heat shield.
Figure 15
Install the intake tube and secure the bracket to the
vibra mount on heat shield using provided fender wash-
er and m6 nut.
Figure 16
Congratulations! You have just completed the installa-
tion of the World’s first tuned intake system, the
Power-Flow intake, featuring MR Technology.
Periodically, check the system for fitment, this will
enhance the life of your Power-Flow system.
Now install the air filter to the intake tube and tighten
using 8mm nut driver.
Figure 23
Figure 22
1.
Upon completion of the installation, reconnect the negative battery terminal before you start the engine.
2.
Align the entire intake system for the best possible fit. Once the intake has been properly fitted continue
to tighten all nuts, bolts and clamps.
3.
Periodically, recheck the alignment of the intake system and make sure there is proper clearance around
and along the length of the intake. Failure to follow proper mainentance procedures may cause
damage to the intake and will void the warranty.
4.
Start the engine and listen carefully for any odd noises, rattles and/or air leaks prior to taking it for a test
drive. If any problems arise go back and check the vacuum lines, hoses and clamps that maybe causing
leaks or rattles and correct the problem.
5.
Check the filter for excessive dirt build up. Clean or replace the filter with an original Injen filter (can be
bought on-line at “injenonline.com”). Congratulations! You have just completed the installation of the
best intake system sold on the market. Enjoy the added power and performance of your new intake
system.
A
B
