Initio I/O HIGHWAY Скачать руководство пользователя страница 36

Страница: 36 / 62

initio

If you are installing Windows NT from a CD version, locate the Windows NT

Setup Disk for CD-ROM Installation. Make a backup copy of this diskette before

installation.

Insert the backup Windows NT Setup disk into drive A: and turn on your com-

puter.

Follow the instructions on the screen until you come to a window titled:

WINDOWS NT WORKSTATION SETUP

(for servers, it will read

WINDOWS NT SERVER

SETUP

)

Press

ENTER

to continue setting up Windows NT.

Select

to skip mass storage detection.

Select

to configure additional SCSI adapters.

When prompted by the Windows NT installation, scroll down the list and select

OTHER (Requires disk provided by a hardware manufacturer)

from the

list of Additional SCSI Adapters. A message will appear on screen stating to:

Remove diskette in drive A and set it aside.

Insert

INI-9XXXU/9XXXUW DRIVER DISK 1

and press

<ENTER>

Select:

Initio INI-9XXX SCSI Host Adapter and press

<ENTER>

The Initio host adapter driver is now installed The on-screen instructions will

continue for a complete installation of Windows NT. Refer to your Windows NT

users manual for completion of the operating system installation procedure.

Adding or updating the Initio driver to an existing Win-

dows NT system:

For computer systems using other SCSI host adapters or an IDE drive to provide the

system boot routine, these instructions will guide you through the INI-9XXX host

adapter driver installation. The Windows NT driver will be found on the

INI-9XXXU/

9XXXUW DRIVER DISK 1

. It is important that the SCSI bus hardware and Windows NT

are installed and configured before proceeding further.

Once a Windows NT session is established, use your installed mouse or the appropri-

ate key strokes to select

MY COMPUTER

from the Main Desktop. Execute the

following steps:

Select

CONTROL PANEL

from within the MY COMPUTER group.

Select

SCSI ADAPTERS

from within the CONTROL PANEL group.

Select the

DRIVERS

tab from within the SCSI ADAPTERS group.

In the DRIVERS window, select

ADD

Microsoft Windows NT Driver Installation

Содержание I/O HIGHWAY































































Результаты поиска

Содержание I/O HIGHWAY

Отзывы:

Бренды по названию

Популярные бренды

Initio I/O HIGHWAY, Руководство пользователя

Результаты поиска

Содержание I/O HIGHWAY

Отзывы:

Бренды по названию

Популярные бренды