N
. OTHERS
· 28 ·
Sysptom
Cause
Remedy
No picture.
Brightness adjustment is
turned all the way down.
Adjust the brightness on the monitor
connected to the unit.
No sound.
Sound adjustment is
turned all the way down.
Adjust the volume on the car stereo or
the monitor connected to the unit.
Fast forward,fast
reverse, frame advance,
or slow play is operative.
Sound is not produced during fast
forward, fast reverse, frame advance,
or slow play.
Disc is dirty or scratched.
Wipe any debris off the disc, and do
not use a scratched disc.
Sound or picture is
corrupted.
The remote control and
the remote control
sensor are too far apart.
Operate the remote control with the
signal emitter pointed at the signal
receiver of the remote control sensor.
Improper connection
Check connections.
Improper connection
Check connections.
The signal emitter of the
remote control is not
pointed at the signal
receiver of the remote
control sensor.
The location of use is
producing vibration.
Vibration of the unit can cause sound
skipping and image corruption.
Remote control dose
not operate.
Operate the remote control within a
roughly 3m straight-line distance of the
remote control sensor.
The area between the
remote control and the
remote control sensor is
obstructed.
Remove the obstruction.
The remote control
batteries are worn.
Change the batteries.
The remote control
batteries are inserted
improperly.
Check the positive and negative
orientation of the batteries and insert
correctly.
