INIM Electronics SmartLevel SPS24060S, Руководство по установке

Страница: 15 / 24

Installation manual
Technical description 15
4.4 Technical specifications
DL1 Power supply
module green Indicates that the power-supply unit is
operating (On). In case of fast blinking the LED
indicates an overheat condition of the
power-supply unit.
In case of slow blinking the LED
indicates an overload of the outputs.
DL2 yellow Indicates an active mains fault
condition. In case of slow blinking the LED
indicates an active earth fault condition.
DL3 yellow Indicates an active battery fault
condition.
Specification SPS24060S SPS24160S
AC power
230 V (-15% / 10%) 50/60 Hz
Maximum current draw 230V 0.5 A 1.1 A
Nominal output voltage 27.6 V
Maximum output current 2.1 A 5.2 A
I
max. a
1.5 A 4 A
I
max. b
1.5 A 4 A
Maximum battery current emission during primary power
failure 1.5 A 4 A
Maximum current for external loads and accessory devices 1.47 A 3.97 A
Maximum battery-charge current 0.6 A 1.2 A
Minimum current (I
min
) 30 mA
Battery specifications 2 x 12V, 7 Ah 2 x 12V, 17 Ah
2 x 12 V/7 Ah YUASA NP-12 FR or similar with case
flame class UL94-V2 or higher
Maximum internal resistance of the batteries (R
i max
) 2.7 Ohm 1 Ohm
Output voltage from 18 to 27.6V
Battery shutdown tension 19V
Internal fuse of switching power supply module T 3.15A 250V
Maximum output current ripple 1%
Operating temperature (EN 54-4) from -5°C to 40°C
Operating temperature (EN 12101-10) from -5°C to 75°C
Functional class (EN12101-10) A
Environmental class (EN12101-10) 2
Isolation class I
Enclosure protection class (EN 60529) IP42
Dimensions 325 x 325 x 80 mm 497 x 380 x 87 mm
Weight 2.8 Kg 6 Kg
LED Colour Signalling Note