Functioning
5
Installation and programming manual
Note
Do not touch the filter lenses on the PIR’s when handling the detector.
1-4
Package contents
Inside the package you will find:
•
ODI100H detector
•
Stainless steel wall fixing bracket
•
Installing manual (this)
•
Plastic bag containing:
•• 2 stainless steel metric screw M3 x 8
•• 2 anchor screws and plugs for wall mounting
“U” shaped brackets are not included in the package (accessory items to be
purchased separately; see Appendix, Order codes).
2
FUNCTIONING
2-1
Detection range
The maximum detection range is 18 m (at 120 cm from the ground) with covered
area of about 85°, (25°C, 75% relative humidity).
Particular conditions may increase or decrease the detection range.
ADJUSTMENT
By using the knob (table 2, E) it is possible to move the PIR2 (lower) in order to
obtain different ranges from 3m to 18m.
Table 4: Terminal board
POWER
+
Power supply 12 V
(from 10 to 15 V)
-
MASK
NC
Anti-mask output
Normally closed contact in
standby
TAMPER
NC
24 h anti tamper output
ALARM
NC
Alarm output
Table 5: Top view
A
Zones that can not be
covered
B
Zones that can be
covered by electronic
holder rotation
170°
85°
B
A
B
A
