Installation
1.
Connect the EM600 button to the Previdia control panel loop .
2.
Complete the device addressing process.
Refer to the control panel documentation.
3.
Assign the device to a zone, operating from the front panel (only for Previdia Compact) or
via the Previdia/STUDIO software.
Note
The EM600 button is equipped with an EN54-17 compliant loop short-circuit isolator.
Technical specifications
Input voltage
from 19 to 30 V
Consumption in stand-by
100 µA
Consumption in active status
5 mA
Dimensions
120 x 95 x 31 mm
Weight
96 g
Environmental conditions
Temperature
from -5 to +40 °C
Relative humidity
≤ 95 % without condensation
Documents for the users
Declarations of Performance, Declarations of Conformity
and Certificates concerning to Inim Electronics S.r.l. pro-
ducts may be downloaded free of charge from the web
address www.inim.biz, getting access to Extended
Access and then selecting "Certifications"or requested to
the e-mailaddress [email protected] or requested by ordi-
nary mailto the address shown in this manual.
Manuals may be downloaded free of charge from the
web address www.inim.biz, getting access to Extended
Access and then selecting "Manuals".
Manufacturer's details
Manufacturer:
Inim Electronics S.r.l.
Production plant:
Centobuchi, via DeiLavoratori10
63076 Monteprandone (AP), Italy
Tel:
+39 0735 705007
Fax:
+39 0735 734912
e-mail:
Web:
www.inim.biz
The persons authorized by the manufacturer to repair
or replace the parts of this system, hold authorization to
work on Inim Electronics brand devices only.
About this manual
Manual code:
DCMIIN4AEM600
Revision:
100
Copyright:
the information contained in this document
is the sole property of Inim Electronics S.r.l. No part may
be copied without written authorization from Inim Elec-
tronics S.r.l.. Allrights reserved.
WEEE
lnformative notice regarding the disposal of electrical and electronic equipment (applicable in
countries with differentiated waste collection systems)
The crossed-out bin symbolon the equipment or on its packaging indicates that the product must be disposed
of correctly at the end of its working life and should never be disposed of together with generalhousehold
waste. The user, therefore, must take the equipment that has reached the end of its working life to the appro-
priate civic amenities site designated to the differentiated collection of electricaland electronic waste. As an alternative to
the autonomous-management of electricaland electronic waste, you can hand over the equipment you wish to dispose
of to a dealer when purchasing new equipment of the same type. You are also entitled to convey for disposalsmallelec-
tronic-waste products with dimensions of less than 25cm to the premises of electronic retailoutlets with sales areas of at
least 400m2, free of charge and without any obligation to buy. Appropriate differentiated waste collection for the sub-
sequent recycling of the discarded equipment, its treatment and its environmentally compatible disposalhelps to avoid
possible negative effects on the environment and on health and favours the re-use and/or recycling of the materials it is
made of.
Manuale d'istruzioni/ Instruction manual
Inim Electronics S.r.l. © 2020
DCMIIN4AEM600-100-20200117
