Air2-MC200 | © 2020 Inim Electronics S.r.l.
7
3.1 Enrolling a wireless device
3.1 Enrolling a wireless device
The enrolling procedure allows you to associate a wireless device INIM with the transceiver Air2-BS200
which acts in conjunction with the intrusion control panel.
This procedure varies depending on the control panel in use and the programming software or application:
1. Access the control panel programming.
2. Select the device to be enrolled in accordance with its type:
an input terminal, for a detector (motion detector, magnetic contact, etc.)
an output terminal, for an output device connected to a terminal of a magnetic contact Air2-
MC300
a keypad
a sounder/flasher
a key, for a remote control device, selecting as the associated reader the one simulated by the
transceiver
3. Set the device as “Wireless”.
4. Start the learning phase from the control panel.
5. Press the
ENROLL
button on the wireless device.
3.2 Battery replacement
When changing the battery, it is advisable to press the
ENROLL
button in order to be sure that the device is
synchronized with the wireless transceiver.
