InHand ISE Series, Руководство пользователя

Страница: 25 / 45

IV. Installation
Installation Requirement

Power source requirements: 24 VDC (12
～
48 VDC). Attention shall be paid
to power voltages.

Operating temperature: -40
～
85
℃

Storage temperature: -40
～
85
℃

Relative humidity 5
％～
95% (non-condensing).

Grounding resistance requirement: less than 1 Ω.

Avoid direct sunshine and keep away from heat sources or intensive
electromagnetic interference.

Inspect for availability of cable and joints required for installation.
4.1 Instruction for DIN-Rail Installation
4.1.1 DIN-Rail Mounting
Step 1: Select a place to install the device, and make sure there is sufficient space.
Step 2: Hook the upper lip of the bracket onto the DIN-rail.
Step 3: While pushing down to compress the clips, push the bottom part of the switch
towards the wall.
4.1.2 DIN-Rail Removal
Step 1: As the arrow 1 shows, pull down on the device to compress the bracket clips.
Step 2: Pull the bottom of the device away from the wall until is unsnaps from
the DIN-rail.
Step 3: Unhook the device from the DIN-rail.