6
Step 3: Click “Network >> Cellular”, set profile. The device enables the cellular by default, it will
connect to Internet within a few minutes. If the device cannot connect to Internet, please disable and
restart dialup. (If you use a private network SIM card, you also need to configure APN parameter)
Step 4: Check the dialup status in “Status”, if it shows Connected and there is IP address and other
dialup parameters, the router has connect to Internet by SIM card.
4.3 Wi-Fi to Internet
Step 1: Connect Wi-Fi antenna, and connect PC to the device. Access to router’s WEB management
page. (refer to 4.1)
Step 2: Set Wi-Fi mode: AP or STA.
AP mode (default mode):
IR305 acts as an accsess point to radiate wireless signals, and other terminal
devices can connect this device to access the Internet. It is necessary to ensure that IR305 itself has
been connected to the Internet through wired or cellular. AP mode supports setting SSID name and
encryption authentication mode, and terminal devices will need to input password when connecting.
STA mode: IR305 connects to other AP Wi-Fi device to access the Internet.
