14
4.2 SIM Card Dial-Up
Step 1:
Insert the SIM card into the slot 1 and Install 3 G/4G LTE antenna to the ANT antenna connector,
then Connect the network cable and power cable, at last, power the device.
Attention
To replaced or plugged SIM Card,you must power off and restart to avoid data loss or equipment damage.
Step 2:
Open the browser, login device WEB interface. (refer to 4.1 Wired to Internet >> Step1, Step2)
Step 3:
Click on the navigation bar "network >>Cellular" set dial-up access parameters, the device initial
default on dial-up function, wait a few minutes to access the Internet.
(if not dial-up, you can restart Cellular Service).
Figure 4-2-1 SIM Card Dial-Up
Step 4:
The device supports dual card mode, when the SIM card insert card slot 2, need to enable dual SIM
card function in advanced settings, private network dial parameters can be set in the dial
parameter set, new click on the application, and then select at the cellular network operator.
Figure 4-2-2 Dialing Parameters
Step 5:
Click on the navigation bar "status >> network connection" to view the network status, showing the
Содержание InRouter301
Страница 1: ...IR300 Series of Industrial Routers Quick Installation Manual Data Version V 1 1 2021 10...
Страница 4: ...2 II Panel Introduction and Structural Size 2 1 Panel Introduction Figure 2 1 Equipment Panel...
Страница 9: ...7 Figure 3 4 a Glue Stick Antenna Installation Figure 3 4 b Chuck Antenna Installation...
