InHand InDTU324, Руководство пользователя

Страница: 8 / 57

4
management update its configurations, read device status, perform remote upgrade, and
locate the base station.
RTOOL Remotely update the DTU firmware or configuration by RTool. The network
should be accessed between RTool side and DTU when using this function.
55 AA command Please refer the IHDMP user manual
Short message
management Supports remote configuration, forcible login, status query, and reboot.
Multi-center
Supports multiple IP centers in poll or parallel mode.
The application cernter IP center must be configured firstly, and then
configure the extended center in sequence.
Link maintenance
To avoid network congestion caused by the problem of the operator network
optimization parameters, a byte of IP packets is sent to the detection host
every network idle interval after this function is enabled. (This function is
applicable only to V1.4.3 and later versions.)
The DM platform, for the use scenarios of the mainland and overseas, the corresponding
domain names are http://c.inhand.com.cn and http://g.inhandnetworks.com; the platform
also supports setup or install on the client's private server.