4
3.1.
Installing and Uninstalling the Device on a DIN-Rail
3.1.1.
Installing with a DIN-Rail
Procedure:
Step 1: Select an installation place and reserve enough space for installation.
Step 2: Insert the upper part of the DIN rail seat onto the DIN rail. Grab the lower end of
the device and revolve it upward in the direction indicated by arrow 2 with gentle force, to
insert the DIN rail seat onto the DIN rail. Check that the device is installed reliably on the
DIN rail, as shown in Figure 3-1 on the right.
Figure 3-1-1 DIN rail installation schematic diagram
3.1.2.
Uninstalling with a DIN-Rail
Procedure:
Step 1: Press the device downward in the direction indicated by arrow 1 in Figure 3-2 to
create a gap near the lower end of the device so that the device isolates from the DIN rail.
Step 2: Revolve the device in the direction indicated by arrow 2, and grab the lower end
of the device and move the device outward. Lift the device when its lower end isolates from
the DIN rail. Then, take off the device from the DIN rail.
Figure 3-1-2 DIN rail disassembly schematic diagram
1
DIN rail seat
DIN rail
2
1
2
