APT-9S
Programmable Timer
Quick Start Guide
The times for the ON and OFF sequences may be specified in seconds/minutes or minutes/hours by
changing the TIMER/PULSE (MIN/SEC) switch. If the MIN position is selected (minutes/hours) the
MIN and HR buttons allow setting the times. If the SEC position is selected (seconds/minutes) the SEC
and MIN buttons allow setting the times.
After setting the ON time press the PROG button and the display will show:
After setting the OFF time press the START button to start the timer. The device will count down the
OFF time and then turn the relay on. It will then will count down the ON time and turn the relay off.
This cycle will repeat.
While in the DUAL TIMER mode the START button will toggle between running the cycle and
stopping the cycle. The output will be forced OFF when the timer is stopped.
Pressing the MODE switch will return the unit to the NORMAL (TIMER or PULSE) mode.
Holiday Setup Mode
The unit may be programmed to skip a set number of days. If the MODE button is pressed twice while
in the NORMAL mode the unit will enter the HOLIDAY SETUP mode.
The day to start skipping is selected by the DAY button which will cycle through each of the days of
the week. When the appropriate day is selected press the MIN key to select the number of days to
suspend the sequencing. Press the START button to return to the NORMAL mode.
Example shows 4 day holiday starting on Friday.
6 / 6
© Ingram Products, Inc
02/19/12
MO
Ho : – –
SET
FR
Ho : 04
SET
OFF
– – : – –
SET
TMR
