INGO Technology CO., LIMITED
Tel：+86 (020) 29805430 (0755)83205835 Fax：+86 (020) 29805432
Add: Third floor, building 3, Jinke Industrial Park, No.1, Xinji Avenue East, Nancun Town, Panyu District, Guangzhou
G
、
If you use an additional power cord, remember that the total amperage of the equipment plugged
into the additional power cord does not exceed the rated amperage of the power supply. In addition,
remember that the total amperage of all equipment plugged into the wall does not exceed the rated
amperage of the wall socket.
H
、
Do not try to repair the photo machine yourself. If you encounter problems, please seek the photo
machine maintenance technician in time.
I
、
For the safety of people and machines, please be sure to connect the ground wire. The specific
requirements shall be informed by the installation personnel.
J
、
Do not plug and unplug the print cable and power cord with power, otherwise the motherboard will
be damaged.
1.2
Precautions for operation
A
、
Always use the power switch to turn off the photo machine. (i.e. the power switch behind the right
side of the photo machine) please do not unplug the photo machine power plug
data cables before the machine power is cut off.
B
、
Please do not put tools or other items on the printing platform or cover plate of the machine, so as to
avoid unnecessary losses caused by untimely cleaning before the machine is running.
C
、
Before handling the photo machine, please make sure that your printing trolley is fixed in the initial
position.
D
、
When printing, be sure to use the paper jam (anti warping sheet) to prevent the paper from
deflecting and scraping the nozzle.
E
、
The machine must be guarded while it is working. (there shall be full-time operators).
F
、
The grating strip shall be checked frequently to see whether it is clean and damaged. If it is dirty, it
shall be cleaned with a cotton swab dipped in alcohol.
G
、
The guide rail shall be checked frequently to see whether it is clean; It is recommended to apply
grease (or part lubricating oil, etc.) on the guide rail after using it for 1-2 months to reduce the friction
of the sliding block.
H
、
Check and clean the maintenance station regularly.
I
、
Do not let the nozzle leave the maintenance station for a long time and be exposed to the air.
J
、
Under abnormal shutdown state; Do not pull the trolley manually and quickly, but start it to return to
the warehouse automatically.
K
、
Maintain the machine regularly to reduce the impact of dust and ink on the machine.
+86 (020) 29805432
Add: Third floor, building 3, Jinke Industrial Park, No.1, Xinji Avenue East, Nancun Town, Panyu District, Guangzhou
If you use an additional power cord, remember that the total amperage of the equipment plugged
the power supply. In addition,
remember that the total amperage of all equipment plugged into the wall does not exceed the rated
Do not try to repair the photo machine yourself. If you encounter problems, please seek the photo
For the safety of people and machines, please be sure to connect the ground wire. The specific
power, otherwise the motherboard will
Always use the power switch to turn off the photo machine. (i.e. the power switch behind the right
side of the photo machine) please do not unplug the photo machine power plug or other relevant
Please do not put tools or other items on the printing platform or cover plate of the machine, so as to
avoid unnecessary losses caused by untimely cleaning before the machine is running.
Before handling the photo machine, please make sure that your printing trolley is fixed in the initial
When printing, be sure to use the paper jam (anti warping sheet) to prevent the paper from
time operators).
The grating strip shall be checked frequently to see whether it is clean and damaged. If it is dirty, it
hecked frequently to see whether it is clean; It is recommended to apply
2 months to reduce the friction
Do not let the nozzle leave the maintenance station for a long time and be exposed to the air.
Under abnormal shutdown state; Do not pull the trolley manually and quickly, but start it to return to
regularly to reduce the impact of dust and ink on the machine.
2
