INGICS
TECHNOLOGY
Certification
Bluetooth SIG Qualification
Japan MIC Regulatory
FCC Regulatory
FCC Statements
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface
cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation
Model number: iGS03W/iGS03M
Declaration ID: D048813
Description: Beacon gateway
iGS03W with below certified number
201-200584, 217-204070
iGS03M with below certified number
201-200584, 217-204070, 003-180062,
D180034003
iGS03W
FCC ID:2AH2IIGS03W
contains
FCC ID:2AC7Z-ESP32WROOM32E
iGS03M
FCC ID:2AH2IIGS03W
contains
FCC ID:XMR201707BG96
FCC ID:2AC7Z-ESP32WROOM32E
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
18