INGICS
TECHNOLOGY
1. Scan iBS04 Beacon
You can see
a. MAC ID
b. UUID(iBS04i model only)
c. Major(iBS04i model only)
d. Minor(iBS04i model only)
e. Meas Tx(iBS04i model only)
2. Connect iBS04
a. Power on
b. Press CONFIG icon on the up-right
corner of utility
c. You can see iBS04 to be connected
3. Configure iBS04
a. Press iBS04 to connect it.
b. In page SETTING, you will see like
below figure.
c. You can configure the parameters you
want and press SAVE and DISCONNECT
for the parameters to take effect.
Parameters
In iBS04, Below parameters can be configured.
a. TX power: High(+5 dBm) , Mid(0 dBm), Low( -6 dBm)
b. ADV Interval: 100 ms~1 min.
c. UUID: iBeacon UUID.(iBS04i model only)
d. Major: iBeacon, group name. In default, it is assigned with our lot number.(iBS04i model only)
e. Minor: iBeacon, individual name. In default, It is the last 4 digit of MAC ID in DEC format.(iBS04i model only)
f.
Meas TX: iBeacon parameter, a reference RSSI in 1 Meter. In default, it is -42(dBm).(iBS04i model only)
Revision History
DATE
REVISION
CHANGES
Sep 17, 2018
0a
Initial release
Sep 25, 2018
0b
iBeacon parameters apply to iBS04i only
Dec 12, 2019
0c
Add regulation statement
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
2
