INGICS
TECHNOLOGY
INGICS iBS01 Tag Utility
When powered on, iBS03 Tag starts to advertise immediately. Users can use iBS01 Tag Utility to scan iBS03 Tag and
configure transmit power and advertising internally of iBS03.
The basic configuration steps is
1. At power on, iBS03 will be in configure mode for 20 seconds.
2. Connect with the utility.
3. Change the parameters and save
4. Disconnect and then the parameter will be effective.
Details is as following
1. Scan iBS03 Beacon
2. Connect iBS03
a. Power on
b. Press CONFIG icon on the up-right
corner of utility within 20 secs
c. You can see iBS03 to be connected
3. Configure iBS03
d. Press iBS03 to connect it.
e. In page SETTING, you will see the
figure below.
f. You can configure the parameters you
want and press SAVE and DISCONNECT
for the parameters to take effect.
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
3
