INGICS
TECHNOLOGY
Quick Start
When powered on iBS01 Tag starts to advertise immediately. User can use BLE scan app to scan iBS01 Tag to get
payload to see its working.Detail procedure as following:
1. Power on iBS01 with Battery or
USB without pressing the button.
2. Scan to find iBS01 Tag
3. Tag Info is in payload, detail information
please check format document
Notes when using Master Control Panel APP
●
When scanning the BLE device when using the Master Control Panel, you can see current nearby BLE devices and
the cached BLE device that do not currently exist. To tell the difference, check the RSSI value. If the RSSI is not in
solid color then the device does not currently exist. Or you can use “refresh” in the settings menu( at the top right
corner) to clear the cached information.
Configuration
There are several parameters you may want to configure. Basic procedure is as below.
1. Press and hold the config button on top of the iBS01(right figure) and power on the iBS01.
After power on, release the button. iBS01 will enter the configure mode.
2. Open iBS01 Utility and push scan device
3. Connect and change the parameters.
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
2
