Ingersoll-Rand W9000 Series, Информация о продукте, Страница: 3 / 60

TL-W9691-PIM_ed1 EN-1
EN
Product Safety Information
Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
WARNING
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause personal injury.
● When a secondary handle is supplied, ensure it is properly installed and use two hands to maintain control when operating the tool.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrand.com
IQ
V
Power Control System
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
top of the tool and align the notch with the desired setting. Refer to illustration #2 on page 2.
WARNING
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.
Product Specifications
Tool Model
Voltage Battery
Model
Drive
Sound Level dB(A)
(EN62841)
Impacts per
Minute
Vibration (m/s 2 )
(EN62841)
V, DC Type Size †Pressure (L
p
) ‡Power (L
w
) bpm Level *K
W9491
40
BL2022
(x2)
Square
1"
94.0 105.0
1170
25.8 8.5
W9691 Square (Extended) 95.9 106.9 23.5 7.7
Intelligent Power Control (W9491, W9691)
Mode Direction
Max Torque
ft-lb (Nm)
No Load Speed
(rpm)
Shut-off
Reverse 2200 (3000) 0-890
Forward
180 (250) 500
400 (550) 540
2200 (3000) 0-890
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Conforms to UL STD. 62841-1 & 62841-2-2.
Certified to CSA STD. C22.2 No. 62841-1 & 62841-2-2.
4005366
4004004
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An excessive
accumulation of grease will result in sluggish operation. See drawing 48380273 and table below. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use.
1
8h
1
8h
1 8h
(Dwg. 48380273)
1
IR#
170