Ingersoll-Rand TZ1050, Руководство пользователя

Страница: 42 / 44

USER MANUAL
MODEL NO.: TZ730–1710
Rev. 08 – 14 September 2005
APPENDIX C FLOW CAPACITY & PURGE ADJUST C2
3. PURGE ADJUSTMENT
To adjust the purge pressure, the following steps are to be followed. Refer also to the
flow schematics provided in section 7.

The power is turned on, the dryer is operating.

When either chamber is depressurized and being regenerated, adjust the
pressure on the pressure gauge using the purge adjusting valve supplied.

Refer to table below to adjust purge based on operating/inlet pressure.
TZ730 TZ820 TZ1050 TZ1200 TZ1450 TZ1710
P1 P2 P2 P2 P2 P2 P2
80 83 76 CF 80 74 80
90 85 80 90 82 78 82
100 86 81 90 82 81 85
110 86 81 97 82 77 82
120 88 CF 98 CF CF CF
NOTE: P1 = dryer inlet pressure (psig), P2 = dryer purge pressure (psig) based
on dryer inlet temperature (100°F), CF = consult factory.