Ingersoll-Rand Thermo King Precedent C-600M, Руководство оператора

Страница: 77 / 152

TK 56171-2-OP-EN 77
during this period. After 30 seconds, the Standard Display will appear and
the remote indicator alarm light will go off.
N No otte e:: The Alarm Icon does not appear on startup with log alarms present.
Figure 82. Log Alarm Notice
N No otte e:: If required, an engine start may occur while the display above is
shown. This is normal operation.
Check Alarm
Check Alarms are indicated by a steady alarm icon at the side of the display.
If the alarm is specific to a zone, a smaller alarm icon will appear next to the
affected zone. This level of alarm serves as a notice to take corrective action
before a problem becomes severe. The unit will run with Check Alarms but
some features and functions may be inhibited. The TemperatureWatch
screen is disabled if a Check Alarm is active.
Unit Level Check Alarm
If the alarm pertains to the entire system (not an individual zone, e.g, Alarm
Code 10), the alarm icon will appear at the right side of the display as shown
(
Figure 83, p. 77 ). Both Zone Specific and Unit Specific Alarms can exist at
the same time.
Figure 83. Alarm Icon
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss