Ingersoll-Rand SS4L5, Руководство пользователя

Страница: 2 / 17

PRODUCT REGISTRATION
To register your product with an Extended Warranty Kit, go to www.IRrecip.com/
registration in your Web browser. Otherwise, you must contact your local full service
air solutions provider
.
To locate your nearest provider:
1. Go to www.ingersollrandproducts.com in your Web browser.
2. Select Americas Region from main page.
3. Click “Customer Service”.
4. Click “Contact Us”.
5. Click “Compressed Air Solutions”.
6. If you are located in the United States, enter your 5-digit zip code in the field to
find your local full service air solutions provider and then press “Search on Zip
Code”. If you are located outside of the United States, select your country from
the “International Locations” list and then press “Submit”.
GENERAL INFORMATION
n
Introduction
This manual provides safe and reliable instructions for the installation, operation
and maintenance of your
Ingersoll Rand air compressor. Carefully read this
manual before attempting to operate or perform any maintenance. If you are
uncertain about any of the instructions or procedures provided in this manual,
contact
Ingersoll Rand . We recommend you retain this manual, and all
publications provided with your air compressor, in a location which is accessible
to all personnel who operate and service your compressed air equipment.
n
Application
Your air compressor unit is suitable for operating air tools, caulking guns, grease
guns, sandblasters, etc. Depending on your application, the following accessories
may be required:
l
An air pressure regulator to adjust the air pressure entering the tool or
accessory.
l
An air line filter for removal of moisture and oil vapor in compressed air.
l
An in-line lubricator to prolong the life of air tools.
l
Separate air transformers which combine the functions of air regulation
and/or moisture and dirt removal.
Contact your nearest authorized dealer or call 1-800-AIR-SERV for more
information on air tools and accessories for your application.
n
Additional References
Unless otherwise stated, dimensions, weights and measurements are provided in
standard U. S. measure followed in parentheses by the metric conversion. Any
torque values given are stated in inch or foot pounds followed by the
Newton-meter equivalent in parentheses.Electrical characteristics are given in
voltage-phase-hertz.
EXPLANATION OF SAFETY SIGNAL WORDS
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or property damage.
Indicates information or a company policy that
relates directly or indirectly to the safety of
personnel or protection of property.
RECEIPT & INSPECTION
Ensure adequate lifting equipment is available for unloading and moving the
compressor to the installation site.
l
Lifting equipment must be properly rated for the weight of the
compressor. Weight information is printed on a label attached to the
shipping container.
l
Lift the compressor by the shipping skid only.
l
Do not use the motor lifting eye to lift the entire compressor. The motor
lifting eye is for removing the motor from the compressor only.
l
Do not work on or walk under the compressor while it is suspended.
Use suitable lifting equipment (i.e. forklift) to lift and transport the compressor to
the installation site. Ensure the lifting equipment, straps, etc. are capable of
supporting the weight of the compressor.
Before signing the delivery receipt, inspect for damage and missing parts. If
damage or missing parts are apparent, make the appropriate notation on the
delivery receipt, then sign the receipt. Immediately contact the carrier for an
inspection.
All material must be held in the receiving location for the carrier’s inspection.
Delivery receipts that have been signed without a notation of damage or missing
parts are considered to be delivered “clear.” Subsequent claims are then
considered to be concealed damage claims. Settle damage claims directly with
the transportation company.
If you discover damage after receiving the compressor (concealed damage), the
carrier must be notified within 15 days of receipt and an inspection must be
requested by telephone with confirmation in writing. On concealed damage
claims, the burden of establishing that the compressor was damaged in transit
reverts back to the claimant.
Read the compressor nameplate to verify it is the model ordered, and read the
motor nameplate to verify it is compatible with your electrical conditions.
Make sure electrical enclosures and components are appropriate for the
installation environment.
2 80448251 Rev. &
EN
WARNING
C A UT I O N
NOTICE
WARNING
D ANG E R
RELEASED 31/Jan/2020 19:25:50 GMT