Vehicle Feature Identification
Page 6
IR Industrial Electric Vehicle Owner’s Manual
VEHICLE FEATURE IDENTIFICATION
H
O
RN
OFF
ON
• Before using vehicle, read operating instructions.
• Remain seated and hold on to seat handle while moving.
• Do not start vehicle until all occupants are seated.
• Two (2) persons per seat maximum.
• Operate from driver side only and not on public roads.
• Keep entire body inside vehicle while moving.
• Drive slowly in turns and straight up and down slopes.
• Do not leave children unattended on vehicle.
• Never operate under the influence of alcohol or drugs.
• Use brakes to reduce speed when coasting downhill.
• Never stand in front of or behind vehicle.
CCI 101960601
WARNING
ROLLOVER OR FALLING OFF MAY CAUSE DEATH.
OPERATING INSTRUCTIONS
• Read Owner's Manual and safety warnings located on dash panel prior to driving.
• Study and understand controls.
• Make sure wheels are turned in desired direction.
• Turn key to “ON” position and be sure nothing is in your path.
• While vehicle is stopped, select direction by placing
shift lever or switch in desired position:
F – Forward N – Neutral R – Reverse (Buzzer will sound)
• Vehicle will start moving when accelerator pedal is depressed.
• Slowly depress accelerator pedal to increase speed. Park brake will
release when accelerator pedal is depressed.
• To stop, release accelerator pedal and depress brake pedal.
• After stopping the vehicle:
- Firmly depress park brake until it locks.
- Place Forward/Reverse switch in "NEUTRAL" position.
- Turn key “OFF” and remove key when not in use.
CCI 101621601
BATTERY
WARNING LIGHT
BATTERY CONDITION
INDICATOR
HEADLAMP SWITCH
PARK BRAKE
PEDAL
BRAKE PEDAL
ACCELERATOR PEDAL
OPERATING INSTRUCTIONS DECAL
Note: Canopy and windshield omitted
from this illustration for clarity.
KEY SWITCH
TURN SIGNAL
SWITCH
DRIVER/PASSENGER
WARNING DECAL
