EN
80446339
Rev B
EN-10
Current status screen
The CURRENT STATUS screen is considered to be the “normal” display that the
controller shows.
The following items and their present values can be displayed on the right
side of the screen by pressing the up and down arrow buttons.
The controller automatically returns the display to this CURRENT STATUS
screen from other screens if no buttons are pressed within 0 seconds.
Use the UP and DOWN arrows to move between selections.
CURRENT STATUS items
% Energy Saving
% Capacity
Package kW
Package Discharge Temperature
Airend Discharge Temperature
Injected Coolant Temperature
Sump Pressure
Separator Pressure Drop
Coolant Filter Pressure Drop
Inlet Vacuum
Inlet Filter
Total Hours
Motor Speed
Remote Pressure (optional)
Time and Date
Program Name
Version of Drive Software
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When the CURRENT STATUS screen is displayed, pressing the ENERGY STATUS
button will toggle the display to the ENERGY STATUS screen. Likewise, when
the ENERGY STATUS screen is displayed, pressing the STATUS button will
toggle the display to the CURRENT STATUS screen.
The ENERGY STATUS screen displays the following items.
ENERGY STATUS Items
Average Package kW-hr
Average % Capacity
Average Capacity
Energy Cost
Energy Savings
Lifetime Energy Savings
Main menu
Figure 4: Main Menu Screen
The MAIN MENU screen can be accessed from the CURRENT STATUS screen by
pressing the MAIN MENU button, identified by the words “MAIN MENU” in the
bottom line of the screen directly above the center button.
The MAIN MENU screen is the point from which various operator functions
can be accessed. Refer to the operator panel flow diagram.
Each of the functions can be chosen by using the up and down arrows to
highlight it on the screen.
The controller will go to the highlighted function if the SELECT button is
pressed or will return to the CURRENT STATUS screen if the STATUS button is
pressed.
The language and compressors of measure are preset prior to the compressor
leaving the factory. If you need to change these settings, contact any
Ingersoll Rand office or qualified Ingersoll Rand distributor.
•
•
•
•
•
•
110812.16.23
Содержание R132
Страница 45: ...110812 16 23...
Страница 46: ...110812 16 23...
Страница 48: ...ingersollrandproducts com 2012 Ingersoll Rand plc 110812 16 23...