Ingersoll-Rand QM3 Series, Информация по обслуживанию, Страница: 4 / 8

4 Form 04581351-Edition 2
Mounting Options
(Dwg. 80149735)
(Dwg. 80150675)
There are two options for mounting tools.
1) When fixture is between Spindle and Transducer (Y), remove and
discard Spacer Plate (Z).
Note: Fixture Plate (X) must maintain thickness of Spacer Plate (Z).
2) When Fixture Plate (X) is in front of Spindle Flange, Spacer Plate (Z)
thickness may be ignored:
Note: M8 or M10 mounting screws must be lengthened by Fixture Plate
(X) thickness.
Recommended Fixture Plate Dimensions
QM Series Wiring (Cable) Chart
X
Y
X
Z
Y
Series
Plate
Thickness
Minimum
Counter-
bore Ø
Bolt
Circle Ø Number of
Bolt Holes
Bolt Hole
Ø
Supplied
Bolt Size
Through
Hole Ø
Through
Hole ID
Chamfer
(mm) (mm) (mm) (mm) (mm)
QM3 10 59 45 2 8.97 - 8.71 M8x1.25x30 31.015 -30.985 0.5 x 45°
QM5 11.2 67 50 2 8.97 - 8.71 M10x1.5x35 32.515 -32.485 1.05 x 45°
QM7 11.2 71 57.16 6 8.97 - 8.71 M8x1.25x30 44.48 - 44.45 1.05 x 45°
QM9 18 90 76.2 6 10.63 - 10.37 M8x1.25x45 63.53 - 63.5 1.55 x 45°
Electronics
Pod
N/A N/A 60 2 6.65 - 6.05 M6x1x18 39.0 - 50.0 N/A
Connector Pin Wire color (Cable) Logic Connector Pin
A Red VCC 13
B Black COM 14
C Gray Spare 1 12
D Pink Spare 2 27
E Brown Spare 4 15
F Yellow Sine 21
G Orange Cosine 28
H Violet Spare 3 7
J Green Ground Sense 20
K Blue RX+ 5
L Blue/White RX- 6
M White TX- 8
N White/Blue TX+ 9
U Red Motor Phase B 23
V Black Motor Phase C 34
W White Motor Phase A 36
X Green/Yellow Ground 25
---- ---- TX Shield 1
---- ---- RX Shield 4
---- ---- Hall Shield 22
---- ---- Motor Shield 16