Ingersoll-Rand QiP Series, Информация о продукте

Страница: 3 / 56

45738879_ed4 EN-1
EN
Product Safety Information
Intended Use:
These Air Impact Screwdriver are designed to remove and install threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com
Power Management System
For models that include a power management system, the system allows operator reduction of
maximum output power in either the forward or the reverse direction.
For QIS tools, the regulator (11) is in the inlet bushing, turn the regulator until desired power.
(Please refer to drawing 45721669 on page 2). For QIP tools, the regulator (12) is in the handle,
turn the regulator until desired power. (Please refer to the drawing 45724374 on page 2).
Product Specifications
Model(s)
Capability (Screw Size) Free Speed Bit Size
mm (in) rpm mm (in)
QIS08Q4 M4 (5/32) 13500 Max. 6.35 (1/4)
QIS14Q4 M5 (3/16) 13000 Max. 6.35 (1/4)
QIS20Q4 M6 (1/4) 12000 Max. 6.35 (1/4)
QIS30Q4 M8 (5/16) 12000 Max. 6.35 (1/4)
QIP08Q4 M4 (5/32) 12000 Max. 6.35 (1/4)
QIP14Q4 M5 (3/16) 12400 Max. 6.35 (1/4)
QIP20Q4 M6 (1/4) 11300 Max. 6.35 (1/4)
QIP30Q4 M8 (5/16) 9000 Max. 6.35 (1/4)
Model(s)
Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
Load Free Speed
Level *K
† Pressure (L
p
) ‡ Power (L
w
) ‡ Pressure (L
p
) ‡ Power (L
w
)
QIS08Q4 85.8 96.8 74.7 85.7 4.0 2.0
QIS14Q4 88.3 99.3 77 88 4.2 0.8
QIS20Q4 89.1 100.1 80.5 91.5 4.6 1.0
QIS30Q4 92.4 103.4 88.4 99.4 5.6 1.0
QIP08Q4 83.1 94.1 78.3 89.3 4.3 1.0
QIP14Q4 85.4 96.4 78.3 89.3 6.4 2.1
QIP20Q4 86.6 97.6 81.5 92.5 7.0 1.1
QIP30Q4 90.9 101.9 85.9 96.9 8.3 1.3
† K
pA
= 3dB measurement uncertainty *K= Vibration measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
WARNING
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.