Ingersoll-Rand QE6 Series, Информация по обслуживанию

Страница: 7 / 8

16575169_ed1 7
In-Line Attachment - Installation
1. For Models with Gear Case Sleeves : From threaded
end of Motor Housing slide (rubber) Gear case Sleeve (5)
over Housing. (Slightly lubricating Grip will help ease the
installation process.)
2. Assure presence of Teflon Spacer on Pinion of
Attachment.
3. Position the In-Line Attachment appropriately.
4. Engage the spline on the input spindle of the In-Line
Attachment with the matching internal spline of the
Spindle Assembly (50), then engage the spline on the
Housing assembly with the Gear Case of the Motor
Housing Assembly and thread the Coupling Nut onto the
Motor Housing.
5. While holding the tool using a Spanner wrench on the
Spanner holes of the Gear Case, torque Coupling Nut to
between 45 to 50 lbf • ft (61 to 68 Nm).
Parts and Maintenance
The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased motor
performance, and increased maintenance, and may invalidate all warranties.
Ingersoll Rand is not responsible for customer modification of motors for applications on which Ingersoll Rand was not
consulted.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll Rand Authorized Service
center.
When the life of the motor has expired, it is recommended that the motor be disassembled, degreased and parts be separated by
material so that they can be recycled.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Related Documentation
For additional information refer to:
Safety Information Manual form 16573685.
Product Information Manual form 16576951.
Parts Information Manual form 16574469.
Manuals can be downloaded from www.irtools.com.
QE6 Series Wiring (Cable) Chart
Connector Pin Wire Color (Cable) Logic Connector Pin
A Red VCC 13
B Black COM 14
C Gray Spare 1 12
D Pink Spare 2 27
E Brown Spare 4 15
F Yellow Sine 21
G Orange Cosine 28
H Violet Spare 3 7
J Green Ground Sense 20
K Blue RX+ 5
L Blue/White RX- 6
M White TX- 8
N White/Blue TX+ 9
U Red Motor Phase B 23
V Black Motor Phase C 34
W White Motor Phase A 36
X Green/Yellow Ground 25
----------- ----------- TX Shield 1
----------- ----------- RX Shield 4
----------- ----------- Hall Shield 22
----------- ----------- Motor Shield 16