Ingersoll-Rand ML1000K, Информация о продукте

Страница: 2 / 8

Only allow
Ingersoll Rand
trained technicians to perform maintenance on this product. For additional information contact
Ingersoll Rand
factory or nearest
Distributor.
For additional supporting documentation refer to Table 1 ‘Product Information Manuals’ on page 2.
Manuals can be downloaded from http://www.ingersollrandproducts.com.
The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased performance and increased maintenance and will invalidate all
warranties.
Original instructions are in English. Other languages are a translation of the original instructions.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Table 1: Product Information Manuals
Publication Part/Document Number Publication
Part/Document
Number
Product Safety Information Manual MHD56295 Product Maintenance Information Manual 47099007
Product Parts Information Manual 47112669
PRODUCT DESCRIPTION
MLK Series Chain hoists are powered by compressed air and are designed to lift and
lower loads. They are operated through manual Pull-Chain or Lever-Actuated
pendant control. MLK Series chain hoists utilize a rotary vane air motor to drive a
chain wheel, that lifts and lowers the load. Epicyclic gearing is employed to reduce
the motor speed and multiply the torque. Each hoist is equipped with a spring
operated, Air-Release disc brake to hold a suspended load. The hoist can be bolted
or hook mounted to a trolley or permanent mounting structure.
The MLK Series hoists are suitable for A5 (ASME HST-5), severe duty use in the 0.25
to 1 metric ton range. The MLK series is designed to be used as a high speed
production hoist. The MLKS is designed with reduced chain speed for optimal
control . MLKR Spark-Resistant hoists are equipped with stainless steel chain, and or
bronze hooks, for maximum protection.
2 Form 47112677 Edition 2