Ingersoll-Rand Manual Torque Wrench, Информация о продукте, Страница: 2 / 12

EN-1 48487748_ed2
EN
1. This torque wrench is a precision instrument intended to be used only to tighten screws, bolts
and nuts to a desired torque.
2. Do not use it as a “nut breaker”, pry bar, hammer, or in lieu
of a regular ratchet wrench.
3. Do not apply torque in excess of the maximum capacity
of the wrench. Apply load on the grip only, and do not use
any handle extension bars (a piece of pipe put over the
grip).
4. Head Holder torque wrench should be used with IR
heads. If using special heads, please set torque as formula
on page 15.
5. Make sure that you adjust the wrench to the exact
torque units your specifications call for, or you will severely
under-torque or over-torque, causing severe damage to the
equipment you are working on.
6. Do not disassemble the wrench for any reason. Highly
stressed internal components may cause severe injury
when released in an unintended manner.
7. The wrench should be re-calibrated periodically. The
calibration of the wrench should be checked at least once a year, after any abnormal handling or
overloading, or after 5,000 cycles (“clicks”).
Head types
25
NEWTON
METERS
70
50
45
65
55
60
75
40
35
30
95
90
110
105
125
120
100
115
85
80
.5 1 0 4.5 4
Torque wrench indicates when the
preset torque has been reached by
releasing for a few degree of free
travel, which is usually accompanied
by an audible "click" signal. 45-tooth
reversible ratchet: wrench operates
in both clockwise and counterclockwise
direction.
EASY TO READ SCALES
Major Torque Scale: N.m or Lb.ft
Pull/push style lock knob secures
selected torque from accidental
change, easy to lock and unlock
All-metal durable knurled grip
Minor Torque Scale: N.m or Lb.ft
Hardened alloy steel housing
Head Holder torque
wrench holds different
size Ratchet Heads
Twist shifter cap clockwise
for counterclockwise direction
Twist shifter cap counterclockwise
for clockwise direction
3
2
1
X
X
3
2
1
X
X
Read before you use