EN
47508715001_ed2
EN-5
Product Information: Battery Charger
Product Safety Information
WARNING
Important safety instructions - Save these instructions.
DANGER
To reduce the risk of fire or electric shock, carefully follow these instructions.
Intended Use:
This Battery Charger is designed for charging
Ingersoll Rand
batteries only.
WARNING
Only use Ingersoll Rand charger with Ingersoll Rand IQ
V20
Series Li-Ion batteries.
Use of other batteries or chargers may create a risk of
fire or may cause battery to burst when charging. Personal injury or property damage may result.
Charger is not user serviceable. Repair should only be carried out by an Ingersoll Rand Authorized Service Center.
User service may
result in electric shock, fire and/or serious personal injury.
This is a Class A product. In a residential, commercial or light industrial environment it may cause radio interference.
This product
is not intended to be installed in a residential environment; in a commercial and light industrial environment with connection to the public
mains supply, the user may be required to take measures to reduce interference.
This product is not intended to be used by travelers.
For additional information, refer to Battery Charger Safety Information Manual Form 10567832 and Battery Safety Information
Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Model
Input
Output
Battery
Model Number
Voltage
Rated Capacity
Type
BC1120
BC1121
100-240V AC ~ 50/60Hz,
100W, 160-215VA
21V DC (BC1120),
12.6V/21V DC (BC1121), 4.0A
USB Type A, 5V DC, 500mA
D+/D- Connected, 200Ω
BL2005
20V
1.5 Ah
Li-Ion
BL2012
20V
2.5 Ah
Li-Ion
BL2010
20V
3.0Ah
Li-Ion
BL2022
20V
5.0 Ah
Li-Ion
Instructions for Charging Battery
The charger shall be installed near a socket-outlet that is easily accessible.
Do not charge battery pack when temperature is below 32°F (0°C) or above 113°F (45°C). Completely charge new battery packs before using.
Charging time is approximately 60-90 minutes.
Unplug charger and remove battery pack when not in use.
Action
Condition
Charger Display Alarm
(Sound)
Fuel
Gauge
Green
Red
Plug charger into 100-240V AC
power outlet.
Power On (Stand-By).
l
m
-
mmmm
Insert battery pack into charger.
Charging.
Fuel gauge will indicate state of charge.
l
m
-
ä
mmm
Ê
Communications Failure.
Battery Identification / Read Fault
Reinsert battery. Battery may be defective.
m
l
Low
♪
mmmm
Initial Temperature.
Charging paused until battery has returned to safe temperature.
m
2 x
ä
Low
♪
mmmm
Time Out.
Charge time exceeded. Battery may be defective.
m
3 x
ä
Low
♪
mmmm
In Cycle Temperature.
Charging paused until battery has returned to safe temperature.
m
4 x
ä
Low
♪
mmmm
Over Voltage.
High voltage detected. Battery may be defective.
m
5 x
ä
Low
♪
mmmm
Over Current.
High current detected. Battery may be defective.
m
6 x
ä
Low
♪
mmmm
Remove battery pack.
Charge Completed.
l
m
High
♪
♪
♪
llll
Legend:
ä
Flash
l
On
m
Off
Routine Maintenance
Unplug charger before cleaning. Plastic surfaces should only be cleaned with a slightly damp cloth. Keep vents free of dust and debris.
•
•
•
•
Содержание LUB5130
Страница 2: ......
Страница 28: ... 47508715001_ed2 100 75 75 50 50 25 25 10 10 0 ...
Страница 56: ...ingersollrandproducts com 2015 Ingersoll Rand ...