manualshive.com logo in svg

Ingersoll-Rand LCA015, Инструкция по эксплуатации, техническому обслуживанию и ремонту

Поделиться
Скачать
Ingersoll-Rand LCA015 Скачать руководство пользователя страница 51

50

Disposal

When the life of the hoist has expired, it is recommended that
the hoist be disassembled, degreased and parts separated as to
materials so that they may be recycled.

NOTICE

• Mineral-based oils can be recycled, however, some oils such
as glycols may be extremely toxic and must be identified and
disposed of in accordance with local, state and national
regulations.

For additional information contact:

Ingersoll-Rand Material Handling
P.O. Box 24046
2724 Sixth Avenue South
Seattle, WA 98124-0046
Phone:

(206) 624-0466

Fax:

(206) 624-6265

or

Ingersoll-Rand Material Handling
Douai Operations
111, avenue Roger Salengro
59450 Sin Le Noble, France
Phone:

(33) 3-27-93-08-08

Fax:

(33) 3-27-93-08-00

PARTS ORDERING INFORMATION

Liftchain hoists are designed and constructed to provide long,
trouble-free service. In time it may become necessary to order
and install new parts to replace those that have been subjected to
wear.
The use of replacement parts other than Ingersoll-Rand
Material Handling may result in decreased hoist performance,
and may, at the company's option invalidate the warranty.  For
prompt service and genuine Ingersoll-Rand Material Handling
parts, provide your nearest Distributor with the following:
1.

Complete hoist model number as it appears on the
nameplate.

2.

Part number and part description as shown in this manual.

3.

Quantity required.

The nameplate is located on the brake cover.

Return Goods Policy

If it becomes necessary to return the completehoist or certain
parts to the factory, contact the Distributor from whom you
purchased the trolley, or the nearest Ingersoll-Rand Distributor
in your locality. Ingersoll-Rand will not accept any returned
goods for warranty or service work unless prior arrangements
have been made and written authorization has been provided
from the location where the goods were purchased.

 

NOTICE

• Continuing improvement and advancement of design may
produce changes to this hoist which are not included in this
manual. Manuals are periodically revised to incorporate
changes. Always check the manual edition number on the
front cover for the latest issue.

Содержание LCA015






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды