Ingersoll-Rand Club Car TEMPO, Руководство оператора

Страница: 42 / 92

Page 40
TEMPO AND TEMPO CONNECT GASOLINE
Operators Manual
TPCC01BM00EN017 (Edition E)
• Understand the function of all vehicle controls, indicators, displays, and gauges.
• Make sure that all passengers are seated and use the hand holds or handrails. The operator
must have both hands on the steering wheel.
• Make sure that the front wheels are turned in the direction of travel.
• Make sure that there are no obstructions are in the vehicles path.
• The key switch is set to ON.
• The vehicle is at a full stop.
To move the vehicle in reverse:
1. Set the Forward / Neutral / Reverse control (FNR) to R. Make sure that the multi-purpose buzzer
operates.
2. Disengage the park brake.
3. Slowly push the accelerator pedal.
SLOW OR STOP THE VEHICLE
1. Release the accelerator pedal.
2. Push the brake pedal.
PARK THE VEHICLE
1. Stop the vehicle.
2. Engage the park brake to lock the wheels.
3. Set the Forward / Neutral / Reverse control (FNR) to N.
4. Turn the key to OFF.
5. Remove the key. Keep the key in a safe area.
DRIVING CONDITIONS
UNPAVED SURFACES
Precautions for operation on unpaved or unimproved surfaces:
• Decrease vehicle speed.
• Use extreme caution.
UPHILL SLOPE
WARNING
PREVENT STOPPING ON A HILL WHEN TOWING OR WITH A
LOADED VEHICLE. IF A VEHICLE WITH A LOAD IS STOPPED ON A
HILL, PREVENT SUDDEN STARTS, ROLLING BACKWARD, OR
SUDDEN STOPS. FAILURE TO HEED THIS WARNING CAN CAUSE
THE VEHICLE TO ROLL-OVER, POSSIBLY RESULTING IN SERIOUS
PERSONAL INJURY.
DO NOT USE THE ACCELERATOR PEDAL TO HOLD THE VEHICLE
POSITION ON A SLOPE. WHEN STOPPED ON A SLOPE, USE THE
BRAKE PEDAL TO HOLD THE VEHICLE POSITION.
6
Vehicle Operation
Driving Conditions